Victory Motorcycles Hammer S Rider's Manual page 57

Drive Belt Tension Inspection Maintenance
Drive Belt Deflection - with 10 lbs. (4.5 kg) of force
New drive systems (new belt/sprockets)
After 500 miles on drive system
The following data is provided for use with a Sonic Tension Meter.
Follow the instructions provided with the meter.
Required Data
Span
Belt width
Belt mass constant
Internal tooth cracks
(hairline): OK to run, but
monitor condition
Fuzzy edge cord:
OK to run, but monitor
condition
658.3 mm All Models
28 mm
9.1
Drive Belt Wear Analysis
External tooth cracks:
Replace belt
Hook wear:
Replace belt
5 mm +/- 0.5 mm
6 mm +/- 0.5 mm
Tension
48.3 Hz +/- 1
Missing teeth:
Replace belt
Stone damage:
Replace belt if damage is
on edge
Maintenance
Chipping (not serious):
OK to run, but monitor
condition
Bevel wear (outboard edge
only): OK to run, but
monitor condition
55