Victory Motorcycles Hammer S Rider's Manual page 29

Hide thumbs Also See for Hammer S:
Table of Contents

Advertisement

Instruments, Features and Controls
Instrument Cluster
Multi-Function Display
Odometer
The odometer displays total distance traveled by the vehicle.
Trip Odometers
The ignition switch must be in the ON position to access the trip odometers. The trip
odometers (Trip 1 and Trip 2) display total distance traveled since being reset. To reset a trip
odometer, toggle to the trip odometer. Press and hold the mode button until the meter resets.
Engine Speed (Tachometer)
Engine speed displays in revolutions per minute (RPM).
Gear Position
A gear position displays only when the transmission is in gear and the motorcycle is moving.
Two dashes (--) display if the stop/run switch is in the RUN position and the motorcycle is
not moving while in gear. The dashes also display if the stop/run switch is in the STOP
position.
"N" displays when the stop/run switch is in the RUN position and the transmission is in
neutral.
Clock
Tip: The clock must be reset any time the battery has been disconnected or discharged.
1. Turn the key to the ON position. Use the mode button to toggle to the odometer display.
2. Press and hold the mode button until the hour segment flashes. Release the button.
3. With the segment flashing, tap the mode button to advance to the desired setting.
4. Press and hold the mode button until the next segment flashes. Release the button.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. After completing the
1-minute segment, step 4 will save the new settings and exit the clock mode.
6. Turn the key to the OFF position.
Average Fuel Economy (Accessory)
This mode displays average fuel economy since being reset. To reset, toggle to this mode.
Press and hold the mode button until the meter resets.
Instantaneous Fuel Economy (Accessory)
This mode displays the instantaneous fuel economy of the motorcycle.
Trip Hours Meter (Accessory)
The trip hours meter displays total hours of operation since being reset. To reset, toggle to
this mode. Press and hold the mode button until the meter resets.
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vegas 8-ballHigh-ballGunner2005 vegas

Table of Contents