Victory Motorcycles Hammer S Rider's Manual page 33

Right Handlebar Controls
Engine Stop/Run Switch
Press the top of the engine stop/run switch (STOP) to stop the engine. Press the
bottom of the switch (RUN) to allow operation of the engine. The engine should not
start or run when the switch is in the STOP position.
Starter Button
Press the right side of the button to start the engine. See page 47. The starter button
works only when the stop/run switch is on RUN and the transmission is in neutral or
the clutch is disengaged (lever pulled in toward handlebar.)
Starter Button
Throttle Control Grip
Twist the throttle control grip toward your body to increase engine speed. Twist the grip
away from your body to decrease engine speed. When you release the grip, it returns to the
idle speed position.
Front Brake Lever
Pull the lever toward the handlebar to apply the front brake. Always follow proper braking
procedures. See page 49. To maximize braking effectiveness, use the front and rear brakes
together.
Instruments, Features and Controls
Stop/Run Switch Throttle Control Grip
Front Brake Lever
31