Victory Motorcycles Hammer S Rider's Manual page 30

Instruments, Features and Controls
Instrument Cluster
Multi-Function Display
Average Speed (Accessory)
The average speed mode displays average vehicle speed since being reset. To reset, toggle to
this mode. Press and hold the mode button until the meter resets.
DC Voltage (Accessory)
The volt meter displays battery voltage. If the engine is not running, approximate battery
voltage displays. If the engine is running, approximate charging voltage displays.
Ambient Air Temperature (Accessory)
If the accessory sensor is installed, toggle to this mode to display the ambient air
temperature. The key must be in the ON position.
Diagnostic Functionality
Certain conditions will cause an error message to display in the screen. If this occurs, please
see your VICTORY dealer.
Message
LO DC Voltage Screen
OV DC Voltage Screen
ERROR All
28
Location
Voltage remains below 11.0 volts for more than 10 seconds
Voltage remains above 15.0 volts for more than 10 seconds
Checksum error (gauge malfunction)
Indicates