Table of Contents
Advertisement
Remote One-Button Operation
(Default Setting)
AM
PM
• Press and hold
beeps and a blinking series of lines
ON
OFF
1 2
confirms the start sequence has begun;
release button.
• Main gas flows once pilot ignition is
confirmed.
• Remote automatically goes into Manual
Mode after main burner ignition.
NOTICE
Change from one-button to two-button ignition operation by
pressing and holding
button for 10 sec. immediately after ins-
talling batteries.
is displayed and is flashing. When change is
complete will change to .
Remote Two-Button Operation
• Press
AM
PM
until two short beeps and a blinking series
of lines confirms the start sequence has
ON
OFF
1 2
begun; release buttons.
• Main gas flows once pilot ignition is
confirmed.
• Remote automatically goes into Manual
Mode after main burner ignition.
NOTICE
Change from two-button to one-button ignition operation by
pressing and holding
button for 10 sec. immediately after ins-
talling batteries.
is displayed and is flashing. When change is
complete will change to .
WARNING
If the pilot does not stay lit after several tries, turn the main valve
knob to OFF and follow the operating instructions "TURN OFF GAS
TO APPLIANCE".
STANDBY MODE (PILOT FLAME)
STANDBY MODE (PILOT FLAME)
Remote
• Press and hold
button to set appliance to pilot flame.
TO TURN OFF FIRE
Remote
• Press
AM
PM
NOTE:
ON
OFF
1 2
Element4 Gas Fireplaces
OPERATING the FIREPLACE
button until two short
and
button simultaneously
button to turn OFF.
There is a 5 second delay before the
next ignition is possible.
FLAME HEIGHT ADJUSTMENT
FLAME HEIGHT ADJUSTMENT
AM
PM
ON
OFF
1 2
DESIGNATED LOW FIRE and HIGH FIRE
NOTE:
Backlight must be on for high fire and low fire double-click
operation.
AM
AM
WARNING
If the appliance will not operate, follow the instructions "TURN OFF
GAS TO APPLIANCE".
COUNTDOWN TIMER
AM
PM
ON
OFF
1 2
Press
button, and countdown time disappear.
NOTE:
At end of countdown time period, the fire turns off. The
Countdown Timer only works in Manual, Thermostatic, and
Eco Modes. Maximum countdown time is 9 hours and 50
minutes.
46
Remote
• To increase flame height press and hold
button.
• To decrease flame height or to set appliance
to pilot flame, press and hold
• To go to low fire, double-click
is displayed.
NOTE:
Flame goes to high fire first before
going to low fire.
• To go to high fire, double-click
is displayed.
ON/SETTING:
1.
Press and hold
button until displayed,
and hour flashes.
2.
To select hour press
or
3.
To confirm press
button. Minutes
flash.
4.
To select minutes press
5.
To confirm press
button or wait.
OFF:
EuropeanHome.com
button.
button.
button.
button.
or
button.
Advertisement
Table of Contents
