Carefully cut the black tie wraps which hold
the line set to the bottom of the fireplace then
carefully unwrap the line set. Lay the line set
out towards the location of the Access Door.
Do not kink the lineset and do not bend to a
radius of less than 2"/50
mm
Fit the gas control tab into the bracket on
the Access Door frame.
Element4 Gas Fireplaces
ENCLOSING the FIREPLACE
.
Remove the four bolts holding the white door/
frame cover to the frame. Separate the frame
and cover then mount the Access Door frame
to the rough opening as shown.
Replace the white door/frame cover onto the
frame and secure it with the four bolts.
Tighten the bolt through the mounting
bosses.
37
EuropeanHome.com