Element4 Lucius 140 RD MKII Installation, Operation And Owner's Manual page 40

Direct vent
Hide thumbs Also See for Lucius 140 RD MKII:
Table of Contents

Advertisement

STONES/GLASS ARRANGEMENTS
Ensure that the hearth panel is sitting firmly on the base of the fire box and the shield is installed around the 2
center panel must be inserted in between the burner tubes. The pilot flame must be visible through the hearth panel and the pilot
shield.
Evenly scatter the contents of the bag of stones/glass over the top of the hearth panel and burner. Ensure that none of the stones/
glass enters the pilot area or restricts the operation of the 2
The arrangement is now complete. However, it is important to check that the pilot flame is still visible.
A shows the arrangement for stones; the arrangement for glass is similar.
A
2nd Thermocouple
(actual burner pilot assembly and thermocouple location may vary depending on model)
B shows the pilot area (below) clear of media (above).
C shows the 2
thermocouple area (below) clear of media (above).
nd
Element4 Gas Fireplaces
INSTALLING THE FIRE MEDIA
nd
(grey stones shown here)
B
Pilot Assembly
To see how to arrange media in an Element4 fireplace
please visit the link below.
WWW.EUROPEANHOME.COM/RESOURCES/VIDEOS/
thermocouple.
C
2nd Thermocouple
40
thermocouple. The
nd
Pilot Area
EuropeanHome.com

Advertisement

Table of Contents
loading

Table of Contents