Element4 Lucius 140 RD MKII Installation, Operation And Owner's Manual page 4

Direct vent
Hide thumbs Also See for Lucius 140 RD MKII:
Table of Contents

Advertisement

WARNING
Children and adults should be alerted to the hazards of
high surface temperature and should stay away to avoid
burns or clothing ignition.
WARNING
This direct vent system appliance must be installed as an
OEM installation in manufactured homes (USA only) or
an aftermarket permanently located, or a mobile home,
where not prohibited by local codes and must be
installed in accordance with Manufacturer's instructions
and the Manufactured Home Construction and Safety
Standard, Title 24 CFR, Part 3280, in the United States, or
the Standard for Installation in Mobile Homes, CAN/CSA
Z240 MH Series, in Canada.
If the information in these instructions is not followed
exactly a fire or explosion may result causing property
damage, personal injury or death.
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this appliance.
WARNING
The glass must only be removed by a qualified person.
Gloves should be worn when removing the glass.
Element4 Gas Fireplaces
IMPORTANT SAFETY INFORMATION
: Glass Handling
WARNING
Installation and service must be performed by an
authorized qualified installer, service agency or gas
supplier.
Any alteration to the product that causes soot or carbon to
form and results in damage is not the responsibility of the
manufacturer.
ONLY a qualified person may open the door/remove the
glass.
Do not modify or substitute any part of this appliance.
WARNING
These direct vent appliances must be electrically
grounded in accordance with the local codes or, in the
absence of local codes, with National Electric code, ANSI/
NFPA 70, or the Canadian Electric Code, CSA C22.1
WARNING
This appliance is only for use with the type of gas
indicated on the rating plate. These appliances are not
convertible for use with other gases unless a certified kit
is used and the conversion is performed by an authorized
qualified technician.
Applicable standards are ANSI Z21.50/CSA 2.22 (Vented
Gas Fireplaces) and CAN/CGA 2.17-M91 (Gas-fired
Appliances for Use at High Altitudes.) If your installation
is at an elevation greater than 2000' in the US or 4500'
in Canada, consult with the local authority having
jurisdiction for gas product installations to determine their
specific requirements for high altitude installations.
4
: Installation and Service
: Electrical Grounding
: Gas Appliance
EuropeanHome.com

Advertisement

Table of Contents
loading

Table of Contents