2.1.6 The Desktop Brackets Installation
Unpack the UMG-2000 Series.
The desk brackets have been
Place the system to appropriate site.
2.1.7 The Rack Mount Installation
It is strongly recommended to securely fasten the mounting rack to the floor or wall to
eliminate any possibility of tipping over the rack. This is especially important if you decide to
install several UMG-2000 Series chassis in the top of the rack.
A brief overview of the UMG-2000 Series installation is as follows:
Select an appropriate site in the rack.
Unload 4 the plug screws from each side of the server.
Mount the ear brackets to the server from the each
fixed to the device before
19
packing.
side.