Matrox ATC Series User Manual page 13

Note: Windows 2000/XP – You may need administrator rights to remove certain software.
For more information, see Windows documentation.
Windows 2000/XP –
If your primary display is unusable, restart your computer in VGA mode
1
in VGA mode", page
To remove Matrox software:
2
Click
a "
Start Settings
"
Matrox PowerDesk-HF and Driver
your version and configuration of Windows, this part of the step may not be
necessary.)
Click if you're asked to restart your computer.
b
No
Click
c
Matrox PowerDesk-SE
Restart your computer for the changes to take effect.
3
After your computer has restarted, install the latest display driver for your Matrox
4
graphics card. You may also need to reinstall other Matrox software.
Note: Be sure to check for any last-minute release notes at the end of this manual and in
the Matrox CD-ROM Readme file. Also, check the Matrox Web site
(www.matrox.com/mga) for the latest Matrox software, technical support, and product
information.
10).
*
"
Control Panel
"
Change/Remove
"
Change/Remove
"
Add/Remove Programs
" . (* Depending on
Yes
.
"
Yes
Matrox ATC – User Guide 13
(see "Restarting
(double-click*)