Cancelling The Alarm; Min/Max Mode; Outdoor Alarm - Temperature Vs. Dew Point - Ambient Weather WS-1173B User Manual

indicating the alarm function has been enabled).
Press the SET key to confirm the setting and continue pressing the SET key to toggle through each
alarm mode until it returns to the normal display mode.
Press the SNOOZE key or wait 30 seconds for the programming mode to timeout, and the alarm
mode will return to the normal mode.

5.3.3 Cancelling the Alarm

When an alarm condition has been activated, the specific alarm will sound and flash for 120 seconds.
Press any key to cancel the alarm.
When an alarm condition is activated again within 10 minutes, the alarm will not sound but will
continue to flash until the weather condition is stable. This feature is useful to avoid repeated
triggering for the same alarm value.
The alarm will reset automatically once the value has fallen below the set value, or if a new value is
entered.
5.3.4 Outdoor Alarm – Temperature vs. Dew Point
When the outdoor weather alarm has been triggered, it will flash on the LCD display and the general
outdoor alarm icon and high/low alarm icon will flash. For example, in the outdoor temperature
display mode, when dew point high alarm is triggered the DEW POINT icon will flash along with
general outdoor alarm icon and high alarm icon, indicating that the current alarm source is from dew
point.

5.4 Min/Max Mode

Note: The min and max settings cannot be reset at the same time. They must be reset on an
individual basis.
While in Normal Mode, press the MIN/MAX key to enter the maximum mode, and the MAX icon
and maximum records will be displayed and begin flashing.
Version 3.0 ©Copyright 2015, Ambient LLC. All Rights Reserved.
Figure 4
Page 16