Cancelling The Alarm; Outdoor Alarm - Temperature Vs. Dew Point; Min/Max Mode - Ambient Weather WS-1171 User Manual

Press the SNOOZE key or wait 10 seconds, and the alar

4.3.3 Cancelling the Alarm

When an alarm condition has been activate
Press any key to cancel the alarm.
When an alarm condition is activa
c ontinue to flash until the weather condition is stable. This feature is useful to avoid repeated
triggering for the same alarm value.
The alarm will reset automatically o
e ntered.
4.3. 4 Outdoor Alarm – Temperature vs. Dew Point
When the outdoor weather alarm has been triggered, it will flash on the LCD
outdoor alarm icon and high/low alarm icon will flash. For example, in
display mode, when dew point high alarm is triggered the DEW POINT icon will flash along with
general outdoor alarm icon and high alarm icon, indicating that the current alarm source is from dew
point.

4.4 Min/Max Mode

Wh ile in Normal Mode, press the
and maximum records will be disp
Press MIN/MAX key again to enter the minimum mode, and
b e displayed and begin flashing.
Press MIN/MAX key again to return
In the maximum (or minimum) reading Mode, press the
minimum) value you wish to reset. This value will begin flashing with the time and date time stamp at
which the maximum (or minimum) value occurred. Select the + key again to proceed to the next
Version 1.8 ©Copyright 2011, Ambient LLC. All Rights Reserved.
m mode will return to the normal mode.
d, the specific alarm will sound and flash for 120 seconds.
ted again within 10 minutes, the alarm will not sound but will
nce the value has fallen below the set value, or if a new value is
Figure 4
MIN/MAX key to enter the maximum mode, and the MAX icon
layed and begin flashing.
the Normal Mode.
+ key to display the specific maximum (or
display and the general
the outdoor temperature
the MIN icon and minimum records will
Page 10