Cancelling The Alarm; Min/Max Mode; Outdoor Alarm - Temperature Vs. Dew Point - Ambient Weather WS-1172 User Manual

When an alarm has been set, the alarm icon will be displayed
sounds, the unit will beep and the alarm icon will flash.
Press the SNOOZE key, and the alarm will stop beeping and the alarm icon will continue to flash, and
sound again in 10 minutes.

4.3.3 Cancelling the Alarm

When an alarm condition has been activated, the specific alarm will sound and flash for 120 seconds.
Press any key (other than the SNOOZAE key) to cancel the alarm.
When an alarm condition is activated again within 10 minutes, the alarm will not sound but will
continue to flash until the weather condition is stable. This feature is useful to avoid repeated
triggering for the same alarm value.
The alarm will reset automatically once the value has fallen below the set value, or if a new value is
entered.
4.3.4 Outdoor Alarm – Temperature vs. Dew Point
When the outdoor weather alarm has been triggered, it will flash on the LCD display and the general
outdoor alarm icon and high/low alarm icon will flash. For example, in the outdoor temperature
display mode, when dew point high alarm is triggered the DEW POINT icon will flash along with
general outdoor alarm icon and high alarm icon, indicating that the current alarm source is from dew
point, as shown in Figure 4.

4.4 Min/Max Mode

While in Normal Mode, press the MIN/MAX key to enter the maximum mode, and the MAX icon
and maximum records will be displayed and begin flashing.
Press MIN/MAX key again to enter the minimum mode, and the MIN icon and minimum records will
be displayed and begin flashing.
Press MIN/MAX key again to return the Normal Mode.
Version 1.0 ©Copyright 2012, Ambient LLC. All Rights Reserved.
Figure 4
. When an alarm condition
Page 10