Postscript Setup; Pcl Setup - Xerox Phaser 4622 User Manual

7. Continue customizing the Network Settings options as required, then press Stop to return to
ready mode.

PostScript Setup

Press the Menu button on the control panel.
1.
2. Press the up/down arrows to highlight Tools and press OK.
Note If a password is required, refer to
Press the up/down arrows to highlight Setup and press OK.
3.
4. Press the up/down arrows to highlight PostScript Setup and press OK.
The following PostScript Setup options and settings are available:
PostScript Error Info
Edge to Edge Printing
5. Press the up/down arrows to highlight the option required and press OK.
6. Press the up/down arrows to highlight the setting required and press OK to save the selection.
7. Continue customizing the PostScript Setup options as required, then press Stop to return to ready
mode.

PCL Setup

1. Press the Menu button on the control panel.
2. Press the up/down arrows to highlight Tools and press OK.
Note If a password is required, refer to
3. Press the up/down arrows to highlight Setup and press OK.
4. Press the up/down arrows to highlight PCL Setup and press OK.
The following PCL Setup options and settings are available:
Font Number
Pitch
Symbol Set
Orientation
Form Length
Accessing Tools
Option
Accessing Tools
Option
on page 78 for instructions.
Description
Enables the machine to print a PostScript Error
page if PostScript problems occur during printing.
Used to print to the edge of the output
documents.
on page 78 for instructions.
Description
Sets the default PCL font.
Sets the default pitch (size) for PCL fonts.
Sets the default symbol set for PCL fonts.
Sets the default orientation.
Sets the default number of lines per page.
Setups
Xerox Phaser 4622 81
User Guide