Postscript Setup - Xerox Phaser 6280 User Manual

Item
Image Enhance
Hex Dump
Draft Mode
Line Termination
Default Color

PostScript Setup

Specifies the PostScript settings.
Item
PS Error Report
PS Job Time-Out
Init PS Disk
Paper Select Mode
Default Color
Downloaded From ManualsPrinter.com Manuals
Description
Selects whether to perform image enhancement.
Image enhancement is a feature that makes the boundary line between black and
white smoother to decrease jags and enhance the visual appearance. The default is
On.
Specifies whether to print the data sent from a computer in the ASCII code
corresponding to the hexadecimal notation format in order to check the data
contents. The default is Disable.
Specifies whether to print in draft mode. The default is Disable.
Sets the line termination.
• Off (default)
The line termination command is not added.
CR=CR, LF=LF, FF=FF
• Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
• Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
• CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Specifies the color mode to Color or Black. This settings is used when the color printing
mode setting is not specified for the print job that is sent to the printer.
• Black (default)
Prints in black and white mode.
• Color
Prints is the color mode.
Description
Turns error reporting on or off.
Turns the time-out off, or selects the length of time before timing-out.
Initializes the HDD area that PostScript uses.
Selects a paper tray.
Sets the default as Color or Black.
Phaser® 6280 Printer
103
Description of Menu Items