Starting The Air Conditioner; Setting The Timer - Fedders HFC1009N2F Installation And Operation Manual

OPERATION

Starting the air conditioner

Remote keypad Remote display

Setting the timer

Using the timer, you can turn your air conditioner on or off at
preset times.
Setting the Timer to Start the Unit
Select the desired hour for the air conditioner to start operating.
The air conditioner will continue to be in OFF mode until the timer
activates it.
• With unit running, select desired operation mode and
temperature, then turn unit off
• Press the Timer button to activate Timer
• Press the Hour Selector button. Each time the button is
pressed, the timer will increase or decrease in one hour
increments
• The yellow onboard indicator light, on the indoor unit, lights
up when the timer operation is set
Setting the Timer to Stop the Unit
• While the unit is running in the desired operation mode and
temperature, press the Timer button to activate Timer
• Press the Hour Selector button to increase or decrease time in
1 hour increments
• The yellow onboard indicator light, on the indoor unit, lights
up when the timer operation is set
Onboard display
• Press the On/Off button on the remote control
• The air outlet adjustable louver will start rotating
Then: Select Mode (page 15)
Then: Select settings: Fan speed, adjustable louver
position (page 16)
Timer button
NOTE:
14
Adjust Timer using
these buttons.
To cancel the timer setting, just press the timer
button on the remote again. The yellow LED will
turn off, indicating the timer function is canceled.