Wiring Of Can Communication Cable - Ingeteam INGECON SUN STORAGE 1Play TL M Manual

Ingeteam
2.1.2

Wiring of CAN communication cable

Connect the RJ45 of the communication cable in the CAN-A terminal of the battery. As shown in
the following picture:
The ISS 1Play TL M requires a communication cable with two wires. The wires can be obtained
cutting the RJ9 of the communication cable, on opposite side of the RJ45.
Then, it's necessary to identify which of the wires are the pin 1 and the pin 2. This can be done
by identifying the colors of the wires of the pin 1 and pin 2 in the side of the RJ45.
In the following picture the position of the pin 1 and pin 2 of a RJ45 in shown:
ABH2010IMC23_
Use and settings of the INGECON SUN STORAGE 1Play TL M working with BYD B-BOX
Premium HVS/HVM
13