Communications Equipped As Standard; Communication With A Wattmeter; Electrical Safety; Overvoltage Category (Ovc) - Ingeteam INGECON SUN 3TL Installation And Operation Manual

Unit description

2.2. Communications equipped as standard

These inverters have a dongle for communication via Ethernet or Wi-Fi. It is connected to the inverter at the COM1
port.

2.3. Communication with a wattmeter

In order for the inverter to communicate with a wattmeter, it should be connected via RS-485 at the COM2 port.

2.4. Electrical safety

The design values for electrical safety can be found below.

2.4.1. Overvoltage category (OVC)

These units comply with the standards IEC 62109-1 and IEC 62109-2.
The AC circuit has been designed with overvoltage category III (OVC III). The DC circuit has been designed with
overvoltage category II (OVC II).

2.5. Pollution degree

The units comply with pollution degree 3, as required for this type of inverter.

2.6. Acoustic contamination

The unit produces a buzz when in operation. Do not place it in an occupied room, or on light supports which might
amplify this buzz. The mounting surface must be firm and appropriate for the weight of the unit.
ACL2011IQM01_ - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
PT
11