How To Control The Unit - ACME LED BEAM 350 User Manual

PAN OFFSET —Pan home position adjustment
To select the Pan Offset, press the ENTER button to show the PAN OFFSET on the display. Use
the DOWN and UP button to adjust the value from -127 to 127, press the ENTER button to store.
Press the MENU button to exit.
TILT OFFSET —Tilt home position adjustment
To select the Tilt Offset, press the ENTER button to show the TILT OFFSET on the display. Use
the DOWN and UP button to adjust the value from -127 to 127, press the ENTER button to store.
Press the MENU button to exit.
COLOR OFFSET —Color home position adjustment
To select the Color Offset, press the ENTER button to show the COLOR OFFSET on the display.
Use the DOWN and UP button to adjust the value from -127 to 127, press the ENTER button to
store. Press the MENU button to exit.
GOBO 1 OFFSET —Gobo1 home position adjustment
To select the Gobo 1 Offset, press the ENTER button to show the GOBO 1 OFFSET on the
display. Use the DOWN and UP button to adjust the value from -127 to 127, press the ENTER
button to store. Press the MENU button to exit.
R GOBO 1 OFFSET —Gobo1 rotation home position adjustment
To select the R Gobo 1 Offset, press the ENTER button to show the R GOBO 1 OFFSET on the
display. Use the DOWN and UP button to adjust the value from -127 to 127, press the ENTER
button to store. Press the MENU button to exit.

4. How to Control the Unit

There are three ways to control the unit:
1. Master/slave built-in preprogram function
2. Easy controller
3. Universal DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address setting will
be affect at once. Every time you turn the unit on, it will show "LED MB350" on the display and
13B