3. How to Use the Unit
○
1 Safety Ring: Used to keep the installation safe.
○
2 Sound Switch: Used to turn On/Off the sound switch.
○
3 Manual Strobe: Used to adjust the strobe speed.
○
4 Power Cable: Used to connect to the power supply.
4. Troubleshooting
Following are a few common problems that may occur during operation. Here are some
suggestions for easy troubleshooting:
A. The fixture does not work
1. Check the connection of power and main fuse.
2. Measure the mains voltage on the main connector.
B. No response to the sound
1. Check microphone to see if it is good by tapping the microphone.
4A