Table of Contents
Advertisement
OPERATION AND MAINTENANCE
Storage
1. The service life of the Finisholl will be extended by
proper off-season storage practices. Prior to storing
the unit, complete the following procedures:
a. Completely clean the unit.
b. Inspect the machine for worn or defective parts.
Replace as needed.
c. Repaint all areas where the original paint film is
worn off.
d. Grease all exposed metal surfaces of shanks,
points.
e. Lubricate each point of the machine as stated in
"Lubrication Schedule" on page
f.
Store the unit in a shed or under a tarpaulin to
protect it from the weather. The ground tools and
tires should rest on boards, or some other object,
to keep them out of the soil.
g. If the finisholl is stored outside, unfold the
implement to prevent moisture build up in the
disc gang and wheel bearings.
h. If the unit is stored in the folded position, install
transport locks on the lift cylinders and transport
lock pins on the wings to prevent frames from
settling.
4-28
4-13.
F-756-0321
Advertisement
Table of Contents
