Landoll 8530 Operator's Manual page 142

ASSEMBLY INSTRUCTIONS
3 Row Coil Tine and Reel Harrow
Installation
See Figures 2-20 through
Harrow placement dimensions.
1. Attach the tine/reel arm assemblies to the rear tube
of the center and wing frames using harrow mounting
plates, 3/4 x 5-1/2 bolts, clamp bushings and 3/4 lock
nuts See Figures 3-33. Clamp bushings are installed
on the top mounting bolts.
3-34
2-30 for 3 Row Coil Tine
2. Attach the harrow tine assemblies in correct location
with 5/8 u-bolts and 5/8 flange lock nuts.
3. Front row tines are assembled with the tines above
the stop bolts to prevent damage when shipping
Figure 3-33 Detail A. Remove front tine bolts and
reinstall, with stop bolts above tines.
4. Attach reel assemblies to the reel arm assemblies
using 5/8 x 3-11/16 x 4-5/8 u-bolts and 5/8 lock nuts.
5. Refer to the "3 Row Coil Tine & Reel Adjustments" in
Operation and Maintenance section for coil tine
adjustments See Figure
See
4-19.
F-756-0321