Table of Contents
Advertisement
Lubrication
1. A proper maintenance schedule will insure a long
operating life and peak performance. Performing the
following lubrication will ensure maximum operating
life of the Finisholl
See Table 4-1
Figure
4-15.
2. When lubricating the Finisholl, SAE multi-purpose EP
grease, or EP grease with 3-5% molybdenum sulfide
is recommended. Wipe soil from fittings before
greasing. Replace any lost or broken fittings
immediately.
2
ITEM
1
Disc Gang Bearings
2
Reel Bearings (Greaseable)
2
Reel Bearings (Maintenance-Free)
3
Walking Tandem Hubs
4
Wheel Hubs
5
Radius Rod
and
See
3
2
2
4
1
Figure 4-15: Lubrication Schedule
LUBRICATION TABLE
DESCRIPTION
Table 4-1: Lubrication Table
OPERATION AND MAINTENANCE
3. Disc gang bearings are equipped with triple-lip seals
that will let grease pass and not harm the seal.
Regular lubrication will maintain a full grease cavity
and help purge any contaminants. Grease the
bearings before long periods of storage to prevent
moisture buildup within the bearing cavity.
4. Wheel seals, when properly installed, will allow
grease to pass without harm to seals. Regular
lubrication will extend service life, particularly in
severe operating conditions.
5. The Finisholl is equipped with maintenance-free
bearings in the wheel lifts, self-leveler, and wing
hinges. These areas require no lubrication.
NO. OF LUBE POINTS
1 each
1 each
None
1 each
1 each
1 each
4
5
INTERVAL
(Hours Unless Stated)
10
10
50
50
50
4-13
Advertisement
Table of Contents
