Landoll 8530 Operator's Manual page 150

ASSEMBLY INSTRUCTIONS
Spike & Double Reel Installation
See Figures 2-67 - 2-78
placement dimensions.
On 30'-35' machines install the harrow arm
1.
extensions to the inner wings locations, using 5/8
u-bolts and 5/8 locknuts
Assemble the harrow arm assemblies to the plates
2.
on the back of the finisholl using 5/8 u-bolts and
locknuts around the frame tube and 5/8x2 screws
and 5/8 locknuts through the mounting plates.
There are no bolts used in the mounting holes
second from the top.
3-42
for Spike and Double Reel
.
See Figure 3-39
Assemble the spike bars to the harrow arms using
3.
the 5/8 u-bolts, clamp plates, spike harrow clamps
and flange head locknuts preassembled to the
harrow arms. The clamp plate is placed on top of the
spike bar and is notched to clear the spike tooth
u-bolts as needed.
Assemble the reels to the harrow arms using the
4.
preassembled 5/8 u-bolts and l5/8 ocknuts.
Refer to the spike and double reel harrow in the
5.
operating section for adjustments
.
(SEE PAGE 4-26)
F-756-0321