Helper Bracket For Mounting The Alpine 3800 Series Chassis - Extreme Networks Alpine 3804 Hardware Manual

Alpine 3800 Series Switch Chassis
To mount the chassis into a rack:
1 Mount the helper bracket in the lowest available position in the rack using four appropriate screws
(not provided), as shown in Figure 59.
Figure 59: Helper bracket for mounting the Alpine 3800 series chassis
2 Place the box that contains the chassis upright on a secure flat surface with the front of the box
facing you.
3 Remove the chassis from the box, and remove the packing material from the chassis.
4 Have a minimum of two people lift and place the empty chassis on the helper bracket and slowly
guide the chassis into the rack.
5 While holding the empty chassis, secure it with four or eight suitable screws, depending on the
model, as shown in Figure 60, Figure 61, and Figure 62.
6 After you secure the chassis, remove the helper bracket. Store it for future use, for example, if you
need to remove the chassis.
136
BDbrackt
Extreme Networks Consolidated Hardware Guide