Blackdiamond 6800 Series Switch Chassis; Blackdiamond 6800 Series Architecture; Blackdiamond 6816 Switch Front View - Extreme Networks Alpine 3804 Hardware Manual

13
BlackDiamond 6800 Series Switch
Chassis
There are three models in the BlackDiamond 6800 series: The BlackDiamond 6816 switch, the
BlackDiamond 6808 switch, and the BlackDiamond 6804 switch.
This chapter describes:
• BlackDiamond 6800 Series Architecture on page 195
• Installing the Chassis on page 204
• Removing the Chassis on page 209
NOTE
Read the information in this chapter thoroughly before you attempt to install or remove any
BlackDiamond chassis.

BlackDiamond 6800 Series Architecture

This section describes and shows the architecture of the BlackDiamond 6800 series chassis. For each
chassis, the front view shows an example of a completely installed chassis with optional I/O modules
that you can install in the chassis. The rear view shows the back of the chassis.

BlackDiamond 6816 Switch Front View

The BlackDiamond 6816 switch consists of the following components:
• One 20-slot chassis with backplane
• 16 I/O module slots, labeled slots 1 through 16
• Four MSM64i slots, labeled slots A through D
• Four power supply bays (accessed from the front of the unit)
• Two fan trays (accessed from the front of the unit)
• Two side mounted handles for lifting the chassis
• One electromagnetic discharge (ESD) wrist strap connector
Extreme Networks Consolidated Hardware Guide 195