Following Safety Information; Port Configurations On All Summit Switch Models - Extreme Networks Alpine 3804 Hardware Manual

Table 19 describes port configurations available on the different Summit switch models.
Table 19: Port configurations on all Summit switch models
Ethernet Ports
Switch Model
Summit1i SX
Summit1i TX
Summit5i SX
Summit5i LX
Summit5i TX
Summit7i SX
Summit7i TX
Summit48i
Summit48si
Summit4
Summit4/FX
Summit24
Summit48
Summit24e2
Summit24e2 TX
Summit24e3
SummitPx1

Following Safety Information

WARNING!
Read the safety information in Appendix A thoroughly before installing your Extreme Networks switch.
Failure to follow this safety information can lead to personal injury or damage to the equipment.
• All service to components of a Summit series switch should be performed by trained service
personnel only. Service personnel are persons having appropriate technical training and experience
necessary to be aware of the hazards to which they are exposed in performing a task and of
measures to minimize the danger to themselves or other persons.
• Some devices, such as GBICs, contain fiber optic ports. To protect your eyes, you should never look
at the fiber optic ports while they are on, or look directly at the fiber cable ends when they are on.
Extreme Networks Consolidated Hardware Guide
1000BASE- 1000BASE- 100/1000
SX LX BASE-T
6
6
12
12
12
28
28
6
6
2
Redun- 10BASE-T/
dant 100BASE-
GBIC GBIC TX
2
2
4
4
4
4
4
2 2 48
2 48
16
1 1 24
2 2 48
2 24
24
2 24
1
Following Safety Information
100BASE-
FX
16
69