Port Connections; Port Configurations Available On Blackdiamond I/O Modules - Extreme Networks Alpine 3804 Hardware Manual

BlackDiamond 6800 Series Switch Overview
• VLANs, including support for IEEE 802.1Q
• STP (IEEE 802.1D) with multiple STP domains
• Policy-based QoS
• Wire-speed IP routing
• IP multinetting
• DHCP/BOOTP relay
• RIP version 1 and RIP version 2
• OSPF routing protocol
• IPX routing, including RIP and SAP
• Wire-speed IP multicast routing
• IGMP and IGMP snooping to control IP multicast traffic
• DVMRP
• Console (RS-232) CLI connection
• Telnet CLI connection
• ExtremeWare Vista Web-based management interface
• SNMP support

Port Connections

The BlackDiamond 6800 series switches support the following port configurations that are available on
the different BlackDiamond I/O modules as described in Table 53.
CAUTION
Modules that use SX, LX, and LX70 interfaces contain Class 1 laser devices. The P3cSi, P3cMi,
P12cSi, P12cMi, A3cSi, A3cMi, and WDMi modules also use Class 1 laser devices. These ports can
emit invisible laser radiation. Avoid direct eye exposure to beam.
Table 53: Port configurations available on BlackDiamond I/O modules
Ethernet Ports
10BASE-T/
Module 100BASE-TX
G8Ti
G8Xi
G12SXi
WDMi
10GLRi 1
F32T 32
F48Ti 48
F96Ti 96
F32Fi
190
100BASE-T/
1000BASE-T GBIC 1000BASE-SX
8
8
12
100BASE-FX OTHER
1 10-Gbps
1 10GBASE-LR
32
Extreme Networks Consolidated Hardware Guide