Summit Switch Installation; Mounting The Switch In A Rack - Extreme Networks Alpine 3804 Hardware Manual

5

Summit Switch Installation

You can mount the Summit switch in a rack or place it free-standing on a tabletop.
This chapter describes:
• Mounting the Switch in a Rack on page 107
• Removing and Installing Summit48si Power Supplies on page 111
• Installing the AC Power Cable Retaining Bracket on page 112
• Removing the AC Power Cable Retaining Bracket from a Power Cable on page 114
• Removing the Switch from a Rack on page 114
NOTE
Read the information in this chapter thoroughly before you attempt to install or remove any Summit
switch or before you attempt to install or remove the Summit48si power supplies.
CAUTION
Use of controls or adjustments of performance or procedures other than those specified herein can
result in hazardous radiation exposure.

Mounting the Switch in a Rack

To mount the Summit switch into a rack, you need the following tools, equipment, and resources:
• Helper bracket (provided with the Summit7i switch)
• A minimum of four appropriate screws to secure the helper bracket (not provided)
• Mounting brackets (provided)
• A minimum of four appropriate screws (not provided) to secure the switch into the rack
• # 1 Phillips screwdriver
• If you have a Summit7i switch, a minimum of two people to help install the switch into the rack
Extreme Networks Consolidated Hardware Guide 107