Table of Contents
Advertisement
16 www.electrolux.com
4.
The display shows the first free mem-
ory position.
Press OK to confirm.
5.
Enter the name of the programme.
The first letter flashes.
Touch
Press OK.
6.
Touch
to the right or to the left. Press OK.
The next letter flashes. Do steps 5
and 6 again as necessary.
7.
Press and hold OK to save.
• You can overwrite a memory position.
When the display shows the first free
memory position, touch
press OK to overwrite an existing pro-
gramme.
• To change the name of a programme,
select the Edit Programme Name sub-
menu in the Favourite Programme
menu.
Activating the programme
1.
Activate the appliance.
2.
Select the Favourite Programme
menu. Press OK to confirm.
3.
Select your favourite programme
name. Press OK to confirm.
Press
directly. You can also use it when the ap-
pliance is deactivated (for selected mod-
els only).
10.2 Function Lock
The Function Lock function prevents an
accidental change of the heating function.
You can activate the Function Lock func-
tion only when the appliance operates.
Activating the Function Lock function:
1.
Activate the appliance.
2.
Set a heating function or setting.
3.
Press
display shows Function Lock func-
tion.
4.
Press OK to confirm.
Deactivating the Function Lock
function:
1.
Press
or
to change the letter.
or
to move the cursor
to go to Favourite Programme
again and again until the
two times.
2.
Press OK to confirm.
10.3 Child Lock
The Child Lock prevents an accidental
operation of the appliance.
Activating and deactivating the Child
Lock function:
1.
Activate the appliance.
2.
Touch
until the display shows a message.
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and use
or
and
it later with one press of the sensor field.
Activating the function:
1.
Activate the appliance.
2.
Set the heating function.
3.
Press
display shows Duration .
4.
Set the time.
5.
Press
display shows SET + GO .
6.
Press OK to confirm.
To start SET + GO function, press any
sensor field (except for
ing function starts.
When the heating function ends, an
acoustic signal sounds.
• When the heating function operates,
the Function Lock function is on.
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
• If a heating function operates.
• If you do not change the oven tempera-
ture.
and
at the same time
again and again until the
again and again until the
). The set heat-
Advertisement
Table of Contents
