Checking Before Starting Work - ZANOLLI CITIZEN Series Installation, Use And Maintenance Manual

_______________________________________________________________4. INSTALLATION
The manufacturer cannot answer for damage caused by ignoring
these abovementioned norms as well as the information in this manual.
4.7

Checking before starting work

After completing installation of the unit a series of checks must be carried out,
listed as follows:
- check that the various disassembled parts have been assembled
- check the power cable
- check that the control panel is working
- If present, check that the ventilation hood is working
IMPORTANT - PRE-HEATING PHASE AT FIRST IGNITION
The components of the brand new oven (refractory stone bottom and metal
parts) need to be pre-heated before being used for the first baking.
When the oven is switched on the first time, it is necessary to HEAT IT
GRADUALLY IN ABOUT 5-6 HOURS (1°h=100°C - 2-3°h=150°C -
4°h=200°C - 5°h=250°C - 6°h=300°C). The max temperature has to be
reached at the end of this pre-heating phase.
This procedure is absolutely necessary to avoid damages to any part of the
oven.
____________________________________________________________________________
15 CITIZEN 6 - 9/MC, CITIZEN 6+6 - 9+9/MC DIGITAL VERSION