Auto Switch-On Programming - ZANOLLI CITIZEN Series Installation, Use And Maintenance Manual

_________________________________________________________________5. WORKING
If the Set temperature is to be modified the
top display the relative value on the
means of the
Once the required values have been set, the can be memorised by
pressing the

5.4.3 Auto switch-on programming

To program automatic ignition the oven must be on. Press the general
system on/off button
display and set temperature is displayed in its place.
Press the button and hold it for at least 3 seconds. This displays four
horizontal slashes "----" on the
correct hour in the first two spaces using the
memorise the new hour setting and pass on to setting minutes, press the
key again. The minutes start flashing and can be set in the same way
as the hours.
Before pressing
element power sequence button
corresponding to the day on the upper element control display
For example:
1=MONDAY
2=TUESDAY
3=WEDNESDAY
4=THURSDAY
____________________________________________________________________________
21 CITIZEN 6 - 9/MC, CITIZEN 6+6 - 9+9/MC DIGITAL VERSION
and buttons.
button, and the panel returns to its enabled state.
. The message "OFF" disappears from the
again, set the day of the week using the upper
button should be pressed
display. It can be modified by
for setting timed ignition. Set the
and
. This displays the number
5=FRIDAY
6=SATURDAY
7=SUNDAY
keys. To
.