Switch For Suction Hood; Programming; Clock And Day Setting - ZANOLLI CITIZEN Series Installation, Use And Maintenance Manual

_________________________________________________________________5. WORKING
5.3.6

Switch for suction hood

The switch for suction hood control
is placed on the side part of the control
panel, on the upper side (Pos.1 of Fig.
6.2).
Push this switch on position "I" to start one
of the two motors of the suction hood.
Push this switch on position "II" to start
both motors of the suction hood..

5.4 Programming

5.4.1 Clock and day setting

The time and day can only be set with the system on standby, that is to say
when the
Pressing the
display with the two figures corresponding to the hour flashing.
The correct hour can be set using the
new hour setting and pass on to setting minutes, press the
The minutes start flashing and can be set in the same way as the hours.
Before pressing
element power sequence button
corresponding to the day on the upper element control display
For example:
1=MONDAY
2=TUESDAY
3=WEDNESDAY
4=THURSDAY
____________________________________________________________________________
19 CITIZEN 6 - 9/MC, CITIZEN 6+6 - 9+9/MC DIGITAL VERSION
display "OFF".
key and holding it for 3 seconds displays the time on the
again, set the day of the week using the upper
Fig 6.2
and keys. To memorise the
. This displays the number
5=FRIDAY
6=SATURDAY
7=SUNDAY
Pos.1
key again.
.