Checks Before Starting Up - ZANOLLI CITIZEN EP 70/4+4 Manual For Installation, Use And Maintenance

CITIZEN EP70
single-chamber
CITIZEN EP70
double-chamber
*
N.B. When the unit is consigned without top, it is supplied with a
vapor exhaust connector (for Ø155mm tubing)
Check that the exhaust system creates an adequate draft for
expelling vapors and cooking odors (see paragraph 4.5).

Checks before starting up

4.6
After completing installation of the unit a series of checks must be
carried out, listed as follows:
1. check that the various disassembled parts have been assembled:
- vapour exhaust connection, in the case of module without top (see Fig.
4.4 position C)
- condensation exhaust (see Fig 4.4 position D)
- refractory surfaces (see Fig 4.6)
2. check the power cable
3. check that the control panel is working
4. If present, check that the ventilation hood is working
N.B. Insert the refractory surfaces with the corrugated surfaces
facing downwards.
F [mm] G [mm] H [mm]
535 455
535 455
Fig.4.6 Positioning the slabs of refractory material
CITIZEN EP70
I [mm] L [mm]
350 990
590 990
4. INSTALLATION
M [mm] N [mm]
455 455
455 455
693
693
15