Emissions From Cooking Appliance - ZANOLLI CITIZEN Series Installation, Use And Maintenance Manual

Pizza and delicatessen ovens

Hide thumbs

Table Of Contents

Table of Contents

_______________________________________________________________4. INSTALLATION

dispersion capacity as the appliance itself. The efficiency of this system

must be correctly verified according to the norms in force.

The power cable must terminate with a plug to connect to the electrical

switchgear having a corresponding differential magneto thermal switch.

The equipment is not supplied with a power plug.

The coupling between plug and socket must be such that the earth

conductor is connected first and disconnected last and must have the right

dimensions for the rated current (see Table 3-1). Plugs and sockets for

industrial use of the type CEE17 are suitable or those which satisfy European

norm EN 60309.

The thermal circuit breaker must be calibrated to the total rated current and

the magnetic circuit breaker calibrated to the rated current (In the case of

ovens this is only slightly higher than rated current), while the differential

mechanism must be calibrated to the 30 mA current (see Table 3-1).

The electrical socket must be easily accessible and must not require further

location after the installation of the equipment. The distance between the

equipment and the socket must be sufficient to avoid stretching the power

cable

The power cable must never be trapped under the feet or

wheels of the equipment

If the Power cable is damaged it must be substituted by

customer support or by a qualified service engineer so as to avoid

any risk.

The manufacturer does not accept responsibility for damage caused

by failure to observe the abovementioned norms.

For the position of the electrical power connections, see Fig. 4.3.

4.6