Christie CP2000-ZX Instruction Sheet page 2

INSTRUCTIONS
FOR CP2000-ZX
1. Ensure power to the projector is OFF.
2. At the wall breaker, set the main AC circuit breaker to OFF.
3. Unlock and remove the top front cover.
(Figure 1)
4. Remove the LVPS/Ballast cover. (Figure 2)
a. Loosen the 3 captive screws
securing the cover to the chas-
sis.
b. Lift the cover enough to clear
the tabs at the bottom and
remove.
2 of 5
Figure 1
Figure 2 Remove LVPS/Ballast
CP2000-ZX LVPS Upgrade Instruction Sheet
020-100461-01 Rev. 1 (11-2009)