Honda ST50 Shop Manual page 39

(4) Fix the cushion upper holder with a vise as
shown in Fig. 65 and hit the end of the cushion
sprinv with a steel hammer through a driver
to remove the spring from the upper hold-
er. Eiccessivc care should
be
taken not to
damage the upper holder because it is alu-
minum alloy.
(5) The under holder can be separated from
thcspringinthcsamewayastheupperholdcr.
the piston should
be
fixed with a vise.
The piston is rubber.coated on the exterior.
Do not damage it when fi:w.ing it with a vise.
(6) Pull the pin out that fixes the fork slide pipe,
under holder hodcr and piston with a pin
remover as shown in Fia.67.
(7) Fig. 68 shows the disassembled front cushion
assembly.
37
J<iz,65
fls.66
]111~1
~
--
FOIII SlillePipe •
Fig.68