Shock Absorbers; Chain Guide - Honda ST50 Shop Manual

cno
'80
ADDENDUM
IX. SHOCK ABSORBER
DISASSEMBLY
l. Remove the shock absorber assembly by loosen-
ing the upper andlowercapnuts.
2. Rcmovetheupperjoint.
2. lNSPECTION
Measure the shock absorber spring free length.
SERVICE LIMIT: 195 mm (7.68 in)
J.
ASSEMBLY
I.
Install the spring seat, stopper rubber and lock
NOTE
• Install the
spring with the narrow
pitch end on
the upper joint side .
• Apply LOCTITE. to the Jock nut before instal-
lation.
Install and tighten the upper joint.
3. Install the shock absorber with the cap nuts.
TORQUE SPECIFICATION
3.0- 4.0 kg-m (22-29 ft•lb)
X. CHAIN GUIDE
CONSTRUCTION
The 1980 CTT0 has a chain guide whlch is installed
on the
swing ann as
shown.
SHOCK ABSORBER DISASSEMBLY
TOOL
07959-3290001
~ UPPER JOINT
~
®
LOCK NUT
109