Honda ST50 Shop Manual page 56

54
Inspection
Start the engine. Check the operation of the emer-
gency swi1ch. If 1hc respective switch positions
are not functioning properly. the swi1ch or wiring
is defective.
If the wiring is correct, check the testing con-
ductivity of wires with the switch. If the con-
ductivity is not correct, replace with new one.
Reassembly
Perform assembly in the reverse order of disas-
sembly. Check switch operation.
Optration
The operational principle of the emergency ig-
nition switch is shown in Fig. 125. Even if igni-
tion switch is ON, the primary circuit can
be
open-
ed by operating the switch. (Fig. 125)
Fig.124
Fig.125
C D ~ ® 0
-
© ~ @
®