Troubleshooting - Clean Water Systems Precision-24 Instruction Manual & Specification

5 5 5 5 Troubleshooting

Troubleshooting Troubleshooting
Troubleshooting
Problem
power failure
The fuse blowouts
Pump can
Circuit is interrupted.
not start
Wrong connecting wire
Pipe blockage
Not work
Offering tank is empty
Pipe blockage
Valve is closed
Granule block off check
valve
Air in the pipe
No Flow
Cavitations
Problem of priming
Filter is blocked
Adjust the stroke to
zero.
Valve broken or serious
Low flow
dirty.
Possible Cause
Check the power supply
Change fuse
Find the off position
Recheck the diagram
Open the valve, and clean it
Check the power
Fill the tank
Clean the pipe
Open the valve
Check the valve and clean it
Release the air
Increase the pressure of suction and
shorten the suction pipe.
Re-priming, checking leakage
Disassemble the filter; clean or
change it.
Increase stroke length.
Clean the valve or clean it.
- 13 -
Solution