Clean Water Systems Precision-24 Instruction Manual & Specification page 10

2.2 Tube
2.2 Tube
2.2 2.2 Tube Tube connection
�
Put the coupling nut on the
hose.
�
Cut the hose at suitable length,
and insert on the end cap as deep
as possible.
�
Enlarge the diameter of the
hose a little if needed.
�
Press the tubing sleeve and
tighten the coupling nut
2.3 Power
2.3 Power
2.3 2.3 Power Power connection
�
Make sure the voltage is consistent with the grade marked on the
nameplate.
�
Insert the plug to the right socket.
connection
connection
connection
connection
connection
connection
- 7 -