Start-Up; Setting - Clean Water Systems Precision-24 Instruction Manual & Specification

3 3 3 3 Operation Operation Operation
Operation and
3.1

Start-up

3.1 Start-up
3.1 3.1 Start-up Start-up
�
l Open all the control valves on the input and output tubes. Open
the bypass valves for discharging air, if the pump is with injection valve
or pressure regulating valve. Or loose the coupling nut to discharge the
air.
�
l Start the pump, to check whether the liquid is out from the outlet
tube or the bypass valve.
�
l Close the bypass valve when the pump works normally.
3.2 3.2

Setting

Setting
3.2 3.2 Setting Setting
Adjust strok knob ② to adjust the stoke length.
�
Adjust the frequency button ③④ to control stoke frequency( in
�
percentage).
It is suggested adjust the flow by the frequency.
is for slight adjustment after frequency setting.
and and Setting Setting
and Setting Setting
- 8 -
The
stroke length