Xerox AltaLink B80XX Series User Manual page 213

Replacing Staples in the Booklet Maker for the Office Finisher
1. Open the finisher door.
2. Locate the staple cartridges in the upper left part of the cavity at the bottom of the unit.
3. To remove a staple cartridge, pull the orange tab on the cartridge to the right and then down.
4. Unpack a new staple cartridge.
5. To insert a staple cartridge, push the cartridge up and then to the left, until it clicks into place.
6. Repeat the procedure for the other booklet maker staple cartridge.
7. Close the finisher door.
Xerox AltaLink B80XX Series Multifunction Printer
® ®
Maintenance
213
User Guide