Unloading And Stacking Logs - Wallenstein LXT95 Operator's Manual

Operating Instructions
10. Carefully lower the log on to the trailer and release log.
11. Repeat picking with the next logs until loaded.
Fig. 39 – Lower and release the load
12. Do not load trailer over rated load capacity.
13. Clamp the grapple to one of the logs on the trailer to keep
the boom in a safe position when preparing to transport.
Fig. 40 – Grapple safe position

6.11 Unloading and Stacking Logs

Review page 34.
• Extend stabilizers to support frame during loading and
unloading.
• Position the trailer to provide a firm base for the stabilizer
pads before loading or unloading.
Determine a safe log stack location
• Log stack should be on level ground.
• Ensure stack location does not interfere with safe loading /
unloading of material.
• Tall log stacks should be braced to prevent collapse.
01661
01663
1. Release the boom from safe position. Raise the boom over
the log to be picked so that the grapple is positioned at the
center of the log.
40
Log Trailer & Grapple
Fig. 41 – Braced Stack
Fig. 42 – Stabilizers extended
LXT95 / LXT115
01664
01665