Advertisement
Thank you for choosing this SMARTSTEP Junior product.
This manual provides information on installation, wiring, and switch setting for the SMARTSTEP Junior
Servomotors and Servo Drivers. For information about troubleshooting, refer to the SMARTSTEP Junior
User's Manual (Cat. No. I553).
Intended Audiences
This manual is intended for the following personnel, who must also have knowledge of
electrical systems (an electrical engineer or the equivalent).
• Personnel in charge of installing FA systems
• Personnel in charge of designing FA systems
• Personnel in charge of managing FA systems and facilities
NOTICE
This manual contains information necessary for the operation of the SMARTSTEP Junior
Servomotors and Servo Drivers. Please read this manual thoroughly and understand its
contents before attempting to operate the product. Please keep this manual handy for
future reference after reading it.
Be sure that this manual accompanies the product to its final user.
© OMRON, 2006
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or
by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of
OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is
constantly striving to improve its high-quality products, the information contained in this manual is subject to change without
notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility
for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
Advertisement
