Download Print this page

Omron SMARTSTEP Junior User Manual page 14

Servomotors/servo drivers

Advertisement

Use the Servomotors and Servo Drivers in a specified combination. Using them incorrectly
may result in fire or damage to the products.
Do not store or install the product in the following places. Doing so may result in fire, electric
shock, or damage to the product
• Locations subject to direct sunlight.
• Locations subject to temperatures or humidity outside the range specified in the
specifications.
• Locations subject to condensation as the result of severe changes in temperature.
• Locations subject to corrosive or flammable gases.
• Locations subject to dust (especially iron dust) or salts.
• Locations subject to shock or vibration.
• Locations subject to exposure to water, oil, or chemicals.
Do not touch the Servo Driver radiator, Servo Driver regeneration resistor, or Servomotor
while the power is being supplied or soon after the power is turned OFF.
Doing so may result in a skin burn due to the hot surface.
Storage and Transportation Precautions
Do not hold the product by the cables or motor shaft while transporting it. Doing so may result
in injury or malfunction.
Do not place any load exceeding the figure indicated on the product. Doing so may result in
injury or malfunction.
8
CAUTION
CAUTION
General Warnings

Advertisement

loading