Table of Contents
Advertisement
5 Power Antenna/Amplifier Turn On (Blue/Red)
• Connect this wire to the control terminal of a Power Antenna or an external amplifier.
• When not using a Power Antenna or an external amplifier, this wire is not connected.
6 Telephone Mute (Pink)
• Connect this wire to the control terminal of a Telephone Mute.
• Sound is muted at low level. When not using Telephone Mute, this wire is not connected.
7. CD Changer Socket
• Connect a CD changer to the CD changer socket
MAIN UNIT
REPLACING THE FUSE
When fuse replacement is necessary remove the blown fuse
by using pliers. Then install the new 15 amp. fuse.
LINE OUT CONNECTIONS
• The unit has two pairs of line out terminals (see WIRING figure above). You can use a
separate front or a separate rear channel amplifier to upgrade your system.
RCA Line- out Jacks
• Connect a patch cable (not supplied) from the White (left channel) and Red (right channel)
RCA line output jacks to the line input terminals of the external amplifier.
AUXILIARY INPUT CONNECTIONS
The unit has a pair of auxiliary input terminals. You can connect a portable audio player through
the terminals of the AUX IN cable (see WIRING figure above).
CD CHANGE SOCKET
N.C.
N.C.
CDC
1
3
5
7
2
4
6
8
(sold separately)
1
3
5
7
2
4
6
8
18
CDC
Advertisement
Table of Contents
