Table of Contents
Advertisement
5 10
2
1
3 6
TURNING THE POWER ON........................Any button
Install the front panel and press any button (except
TURNING THE POWER OFF .................................... (1)
When system is on, press the POWER button (1) to turn off the unit.
VOLUME LEVEL CONTROL.......................................(2)
Rotate the VOLUME dial (2) to adjust the volume level.
ADJUSTING THE SOUND
CHARACTERISTICS ...........................................(2), (3)
Press the SEL button (3) shortly:
1. Each time you press the SEL button (3) shortly, the item changes as follows;
VOL
(Volume) (Bass)
2. Rotate the VOLUME dial (2) to adjust the selected item. Make the adjustment within 5
seconds after selecting. After 5 seconds, the display window will revert to display priority.
BASS (BAS 00)
TREBLE (TRB 00)
BALANCE (BAL L=R)
FADER (FAD F=R)
Beep Sound Adjustment:
Press and hold the SEL button (3) for several seconds enter beep sound adjustment mode,
then rotate the VOLUME dial (2) clockwise or counter-clockwise to select as follows:
BEEP 2ND
-
BEEP 2ND mode:
The beep is only generated when all allowed double function button is pressed for several
seconds.
e.g.
When preset button is pressed.
When BND/LOUD button is pressed.
When AS/PS button is pressed.
-
BEEP ALL mode:
The beep is generated when every button is pressed.
-
BEEP OFF mode:
The beep is disabled.
VOLUME
A~ Z/0~ 9
MP3
LOUD
7
BAS
TRB
BAL
(Treble) (Balance) (Fader)
Adjustment Range
BAS –10
BAS 10
TRB –10
10L
10R
10F
10R
BEEP ALL
45W x 4
and
button) when ACC is on.
FAD
TRB 10
BEEP OFF
5
8
MANU/SKIP
4
9
Advertisement
Table of Contents
