Line Out Connections - Sanyo FXD-780GD Operating Instructions Manual

Notes
• When using a two-speaker installation, the Green, Green/Black, Violet, Vio-
let/Black wires, which are used for a four-speaker installation, are not used.
The ends of these wires must be covered with electrical tape to prevent them
from shorting to the unit or the vehicle chassis.
• When using a two-speaker installation, set the FADER control to the center
position.
REPLACING THE FUSE
When fuse replacement is necessary remove the blown fuse
by using pliers. Then install the new 10 amp. fuse.

LINE OUT CONNECTIONS

• The unit has a line out terminals. You can use a separate rear channel amplifier to upgrade your system.
RCA Line- out Jacks (For Rear Speakers)
• Connect a patch cable (not supplied) from the White (left rear channel) and Red (right rear channel) RCA
line output jacks to the line input terminals of the external amplifier.
RCA Line-out Jacks
White (Left)
Red (Right)
18
External Amplifier
Rear Speaker