Figure 8
NO T E
M o u n t i n g C o n s i d e r a t i o n s
O r i e n t a t i o n
The laser head may be mounted in any orientation as long as it is
positioned so the beam is directed into the optical system parallel to, or
orthogonal with, the machine axes being measured.
T h e r m a l i s o l a t i o n
Because there is some heat dissipation from the laser heads, you should
choose the mounting method and location with care. Where possible,
mount the laser head away from the measuring area, to avoid any thermal
effects.
Agilent 5517B/BL/C/D/DL/FL User's Guide
A3 Controller/Reference Board
T h e p a r t n u m b e r o f t h e A 3 B o a r d f o r n e w e r m o d e l s o f t h e
5 5 1 7 B / B L / C / D / D L L a s e r H e a d , e x c e p t t h e 5 5 1 7 F L , i s 0 5 5 1 7 - 6 0 0 3 1 .
T h e p a r t n u m b e r o f t h e A 3 B o a r d f o r t h e 5 5 1 7 F L L a s e r H e a d i s
0 5 5 1 7 - 6 0 0 3 2 .
3
Installation
27